View 855693_1203872.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Data Sheet
Features
* * * * * * * For PCS handset IF applications Usable bandwidth of 1.260 MHz Low loss High attenuation at tones Single-ended or balanced operation Ceramic Surface Mount Package (SMP) Small size
Part Number 855693 220.38 MHz SAW Filter
*
Package
Surface Mount 5.51 x 7.01 x 1.63 mm
Pin Configuration
Bottom View
1 2 3
12
0.76 1.63 NOM. 1.78 MAX.
4 5 6
11 10
7.01 1.27
9
8
7
1.70 5.51
1.27
0.79
1.14
Pin No. 4 6 10 12 3,9 1,2,5 7,8,11
Description Output Output return Input return Input Ground Case Ground Case Ground
Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.13mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating
Subject to change or obsolescence without notice
Rev -
28-Feb-2002
Page 1 of 5
Data Sheet
Operating Temperature Range: (2) -30 to +80 oC
Part Number 855693 220.38 MHz SAW Filter
Electrical Specifications (1)
Parameter (3)
Center Frequency, f0 Insertion Loss at 220.38 MHz Lower 5 dB Point Upper 5 dB Point Lower 33 dB Point Upper 33 dB Point Amplitude Variation 220.08 - 220.68 MHz Phase Ripple 219.765 - 220.995 MHz Attenuation(4) 219.13 MHz (+25 oC) 221.63 MHz (+25 oC) 218.33 MHz 222.43 MHz Source Impedance (5) Load Impedance (5) Notes:
1. 2. 3. 4. 5.
Minimum
221.01 219.13 35 35 -
Typical
220.38 7.2 219.64 221.20 219.29 221.55 0.5 2.1 44 42 48 48 50 50
Maximum
9 219.75 221.63 1.2 3.5 -
Unit
MHz dB MHz MHz MHz MHz dB p-p deg RMS dB dB dB dB
All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Relative to insertion loss at 220.38 MHz This is the optimum impedance in order to achieve the performance shown
Test Circuit:
Actual matching values may vary due to PCB layout and parasitics
27nH 12 4 12nH 50 30nH
50 Single-ended
50
12nH
1,2,3,5,6 7,8,9,10,11
Subject to change or obsolescence without notice
Rev -
28-Feb-2002
Page 2 of 5
Data Sheet
Part Number 855693 220.38 MHz SAW Filter
Typical Performance (at +25oC)
Subject to change or obsolescence without notice
Rev -
28-Feb-2002
Page 3 of 5
Data Sheet
Actual matching values may vary due to PCB layout and parasitics
27nH 12 4
Part Number 855693 220.38 MHz SAW Filter
Matching Schematics
30nH
50 Single-ended
50
12nH
1,2,3,5,6 7,8,9,10,11
12nH
50
Marking
1.34
PCB Footprint
.99 .28 1.34 .28
Date code
ID dot
SAWTEK 855693 XXXXXX
5.71
.99 7.21
This footprint represents a recommendation only Dimensions shown are nominal in millimeters
Tape and Reel
2.7 16.8 O330 Pad 1 ID dot
0.3 2.0 4.0 O1.5
A
1.75 7.5
7.3
16.0
O102
Direction of travel O20.2 O13.0 2.0
2.2 Section A-A 5.8 8.0 O1.5
A
Dimensions shown are nominal in millimeters Packaging quantity: 3000 units/reel
Subject to change or obsolescence without notice
Rev -
28-Feb-2002
Page 4 of 5
Data Sheet
Parameter
Operating Temperature Range Storage Temperature Range
Part Number 855693 220.38 MHz SAW Filter
Maximum Ratings
Symbol
T Tstg
Minimum
-30 -40
Maximum
+80 +85
Unit
o o
C C
Warnings
* * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure
Links to Additional Technical Information
PCB Layout Tips S-Parameters Qualification Flowchart Soldering Profile Other Technical Information
Contact Information
PO Box 609501 Orlando, FL 32860-9501 USA
Subject to change or obsolescence without notice
Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com
Rev -
Or contact one of our worldwide network of sales offices, representatives or distributors
28-Feb-2002
Page 5 of 5

▲Up To Search▲

Price & Availability of 855693

	To Download 855693 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .